Camera Supports

Genus Shoulder Mount System

Sat, 31 Jul 2010 19:28:49 +0000

The GCSMK Genus Shoulder Mount system gives you balance and stability where you need it most. Easy to assemble, the GCSMK is a modular system which can be built to inidividual requirements. Featuring comfortable non-slip handles and parts that can be flipped to suit different cameras and camcorders, the GCSMK sits snugly on your shoulder to give you more control when using hand held camcorders or DSLR cameras such as the Canon EOS 5D, EOS 7D or EOS 550D

Price:£ 605.00

K12 Adjustable Length Multi Jib

Sat, 31 Jul 2010 19:28:49 +0000

The Multi-Jib fastens to any pro-tripod with a 100 or 75mm. bowl or a Hague dolly. It is quick and simple to set up and can be used at three different lengths. At it's standard or short length it will support up to 14kg. and at it's longest length will support up to 9kg.. A 100mm. bowl enables you to fasten your video head from your tripod onto the jib, (an optional Stepper Ring is available if you are on the 75mm. bowl system) or a pan & tilt power head can be used for remote operation. Radial ball bearings ensure super smooth crane movement from ground level to almost 4 metres high and pan 360 degrees. Drag can be added to hold the arm at a set position. Standard bar weights can be used as counterbalance or we can supply weights or sand bags as optional extras.

The Multi-Jib breaks down to just 1.2 metres in length making it very easy to handle and will fit in any vehicle. It is suitable for all handheld camcorders, pro-camcorders and will support a maximum weight of 14kg.

* Choice of three jib lengths

* Quick and simple to set up

* Radial ball bearings ensure super smooth crane movement

* Fits to a Pro 100/75mm "bowl type" Tripod

* The camcorder can move smoothly from ground level to almost 4 metres high & pans 360 degrees.

Supplied in a cardboard carton. Price excludes - tripod, dolly, video head, power head, camera, weights and bag

Price:£ 599.00

GoPro Ride Hero

Sat, 31 Jul 2010 19:28:49 +0000

The Ride HERO is a seatpost and handlebar tube clamp for mounting your quick-release GoPro camera on to tubes/frames ranging from 0.75" to 1.4" (1.9cm - 3.5cm) in diameter.

You can also clamp to chainstays, small roll bars, bolt-heads, windsurfing and kitesurfing booms/control bars, or anything else that is in the size range above.

Comes with pivoting orientation arms allowing for 3-way adjustability, ensuring you can get the angle you want.

Compatible with all GoPro quick-release cameras including the Helmet HERO Wide, Motorsports HERO Wide, Motorsports HERO, Surf HERO, and WIDE HERO cameras. Not compatible with the Digital HERO 5 Wrist Camera.

What's Included:

1 Handlebar/Seatpost Clamp
1 Three-way Adjustable Pivot Arm
Warranty: 1 Year

Price:£ 17.01

GPro Surf HERO Expansion

Sat, 31 Jul 2010 19:28:49 +0000

Tested and approved by pro surfers in macking Puerto, Northern California, and Hawaii, the Surf HERO is a revolutionary quick-release board-mountable camera.

The Surf HERO includes two, removable mounting options:

A stick-on baseplate that takes a couple of minutes to set up and go.
An FCS™ compatible plug mounting system that allows you to allen-screw your camera into the deck of your board when you install an FCS™ center fin plug into the deck of your board. Easily done by any ding repairer or shaper.

Both options allow the camera to be quickly attached and removed from your surfboard.

Compatible with all quick-release GoPro cameras. NOT compatible with the Digital HERO 5 Wrist Camera.

What's Included:

1 High-Impact, 3M™ Adhesive Mounting Disc with Integrated Leash System
1 FCS™-Compatible Male Plug Mount for Attaching to FCS™ Center Fin Plug
1 Rubber Quick-Release Stopper Lock
Warranty: One Year

Camera not included

Price:£ 17.01

GoPro Vented Helmet Strap Mount

Sat, 31 Jul 2010 19:28:49 +0000

Compatible with all GoPro quick-release cameras including the Helmet HERO Wide, Motorsports HERO Wide, Motorsports HERO, Surf HERO, and WIDE HERO cameras. NOT compatible with the Digital HERO 5 Wrist Camera.

What's Included:

1 Adjustable Strap for Vented Helmets
Warranty: 1 Year

Price:£ 17.01

GoPro Head Strap Mount

Sat, 31 Jul 2010 19:28:49 +0000

Compatible with all GoPro quick-release cameras including the Helmet HERO Wide, Motorsports HERO Wide, Motorsports HERO, Surf HERO, and Wide HERO cameras. NOT compatible with the Digital HERO 5 Wrist Camera.

What's Included:

1 Adjustable Head Strap Mount
Warranty: 1 Year

Price:£ 17.01

GoPro Grab Bag

Sat, 31 Jul 2010 19:28:49 +0000

If you want to expand your mounting options for you Motorsports HERO Wide, Motorsports HERO, Helmet HERO WIDE, Surf HERO, or Wide HERO camera...this bag will set you up. It includes 2 flat surface base plates, 2 curved base plates, a thumb knob and stainless steel hardware, 1 quick release buckle, and a vertical J mount for mounting your camera on a vertical wall surface like a car bumper, wall, back of helmet, or similar.

What's Included:

2 Flat, 3M™ Adhesive Mounts
2 Curved, 3M™ Adhesive Mounts
1 Horizontal Surface Quick-Release Buckle
1 Vertical Surface J-Hook Buckle
1 Thumb Knob with Nut and Bolt
Warranty: One Year

Price:£ 17.01

GoPro Tripod Mount

Sat, 31 Jul 2010 19:28:49 +0000

What's Included:

1 Tripod Mount
Warranty: One Year

Price:£ 7.65

SM3 Triple Suction Pad Vehicle Mount

Sat, 31 Jul 2010 19:28:49 +0000

This Suction Mount has 3 suction pads which can be attached to any horizontal or vertical, non-porous flat surface.
There are 3 adjustable brackets on the suction pads and 3 on the triangle plate, with a selection of connecting poles of different lengths so the mount can be used in a variety of positions.
The triangle plate has a 100mm. bowl with a quick release slide plate mounted on a claw-ball leveller, making it quick and simple to set the camera to the required position.
A video head could be used on the mount if required.
It is ideal for mounting a camera onto a vehicle or any non-porous surface.

Ideal for mounting a camcorder onto a vehicle

Fully adjustable

Can be mounted either horizontally or vertically

Three suction pads for extra stability

Quick release camera plate

100mm. Claw-ball leveller

Supports up to 10kg.

Kit includes:-
3 Suction pads (150mm. diameter, pump action vacuum)
1 - Triangle plate with 100mm. bowl
1 - Quick release slide plate with claw-ball leveler
6 - Adjustable brackets
3 - Connecting poles 250mm. long
2 - Connecting poles 500mm. long
1 - Connecting poles 700mm. long

Price:£ 340.38

SM4 Double Suction Car Camera Mount

Sat, 31 Jul 2010 19:28:49 +0000

The Double Suction Mount has two strong suction pads, which can be attached to any flat non-porous surface, these give the camera mount extra stability.
It has a large camera plate which supports the camera over a greater area preventing any movement in the camera's plastic casing.
A double ball bracket, along with the tubular structure, enable the camera to be mounted in a variety of positions.
It’s ideal for mounting a camera either outside or inside a vehicle, or on glass windows, or any flat non-porous surface.

Price:£ 135.32

Varizoom VZ1 Shooter entry level shoulder brace

Sat, 31 Jul 2010 19:28:49 +0000

The VZ-1Shooter provides adjustable fittings for an endless variety of shooting configurations.
The special aluminum alloy allows you to bend the support into the desired position and shape.
Lack of shoulder adjustment is like having a cloth glove 5 sizes too big, it just won't fit!
Our economical 1Shooter is like having an elastic glove that will adjust to fit nearly anyone, big or small!
Customize it with a VariZoom Lens Controller, the VZ-PG-L, the VZ-Pro-L, or the StealthZoom the digital videographer has the perfect combination for getting the best looking video with comfortable hand-held shooting.

Both height and forward/backward position of camcorder platform can be adjusted
Adjust the angle of the handle for a comfortable grip
Bendable shoulder bracket can be shaped to fit the preference of the operator

Price:£ 80.00

Varizoom DV Media Rig pro support

Sat, 31 Jul 2010 19:28:49 +0000

VariZoom's all new DV Media Rig pro support is the most sophisticated shoulder support available for professional MiniDV cameras. Unique features like the swiveling shoulder arch with vertical adjustment and articulating weight balance system allow for perfect balance and comfort. Also included is our rotating accessory mount and extra plush shoulder cushion.

The abdominal support is a spring-loaded suspension pod that distributes the camera weight while providing shock absorption. The support is constructed from 2 adjustable spring loaded telescopic sections designed to negate camera shakes and bounces. Adjust the horizontal position of your camera to comfortably view the LCD screen.

The suspension pod also allows smooth control over the height of your shot. Easily shoot at the eye level of your subject without uncomfortable bending at the waist. Even shoot over a crowd of people by simply raising your camera. No matter your height you will always get the right level shot.

Combining full tilt range, a highly adjustable shoulder platform and a confortable support system the DV Media Rig will add a high level of professionalism for a budget price.

Articulating weight balancing system
swiveling shoulder arch allowing for perfect adjustment for eyepiece and or flip out monitor
Vertical arch adjustment
Quick release camera mount
Rotating accessory mount for lights, monitors, microphones and more
Super plush cushion shoulder pad
2 year warranty

Price:£ 395.00

K14 Pro Jib Arm System

Sat, 31 Jul 2010 19:28:49 +0000

The Hague Pro-Jib has been designed for use with heavier cameras, to support a maximum weight of 14 kilos. The telescopic counterbalancing arm uses standard bar weights for counterbalance (not supplied). All axis points have radial ball bearings giving an effortlessly smooth vertical crane movement of 2 metres. The Jib is supplied with a 100mm "Bowl type" camera plate which enables you to use your own video head, a 100 to 75mm stepper ring is also supplied should you have a 75mm video head. The Pro-Jib can be used on any 100/75mm "Bowl type" tripod or a Hague Dolly D1/2/7

A traditional boom * Supports up to 14kg.

* Telescopic counterbalance arm

* Effortlessly smooth crane movement

* Fits to a Pro 100/75mm "bowl type" Tripod

Supplied in a cardboard carton. Price excludes - tripod, video head, camera and weights.

Price:£ 429.00

Active Camcorder Shoulder Support

Sat, 31 Jul 2010 19:28:49 +0000

Inexpensive shoulder support for various video cameras.

Price:£ 47.00

Manfrotto 595B Fig Rig Camera Support

Sat, 31 Jul 2010 19:28:49 +0000

After years of using the Fig Rig on his award-winning films, Mike Figgis brought his idea to Manfrotto. An idea that is non-traditional in design, but purely simple and effective. The only modular system in the world to smoothly support the DV camera and act as a frame to mount all the accessories

Price:£ 170.00

Manfrotto Fig Rig 595 Bag

Sat, 31 Jul 2010 19:28:49 +0000

Manfrotto Fig Rig padded bag, with handle and shoulder strap.

Price:£ 38.29